Professional Carpet Cleaning Blog - Carpet Cleaning Warrington | Carpet Cleaning | Upholstery Cleaning |Warrington Carpet Cleaners | Affordable Carpet Cleaning Cost

Go to content

Main menu

Removal of chewing gum and sticky adhesives from carpets can be hard-work

Published by D Hickey in Carpet Cleaning · 21/2/2012 00:55:37
Tags: gumremovalresidueremovingcarpetcleaning

Even if you remove all visible evidence of the gum or adhesive, those spots often come back a few weeks due to remaining sticky residues.

An adhesive challenge : Although never recommended, many of your residential customers or facility occupants reach for duct tape (or perhaps equivalent adhesive) to hold down extension cords, cover up seams or attach other items to the floor. After a period of time, the tape is taken up and an ugly, grey adhesive mark is left behind.
As the carpet cleaner
, you are then expected to simply clean the location and create miracles.Even if the obvious adhesive residue is taken out (typically with dry solvents) it is very difficult to remove just about all residue. What is left behind is definitely an invisible sticky residue that may collect soil rapidly and create a complaint within a short period of time, possibly just days following your cleaning is accomplished.

Eating Gum - an identical story - Just a few pieces of chewed, smashed gum in a property or company isn't that big issue.
But clean a massive commercial job - like a cinema - with a bit of gum every square feet or two, and you think hard about adjusting career. Probably something easier and much more glamorous, such as septic tank cleaning. What's the ideal, and fastest, way to successfully get rid of adhesive and chewing gum residues?

The right stuff - Some items of gum and larger adhesive residues are on the surface and can be scraped apart, leaving behind residue that then needs further function.
Scraping surplus gum or adhesive is essential and is the initial principle of cleaning : getting rid of excess matter from the surface.

The tool you use may differ: A spatula, made from plastic, metal or bone, works well. There are specific tools with sharp points for better agitation that can aid in this task. Right after removing the surplus matter in the carpet, you also have to manage the remaining sticky residues.

High heat helps - You can use substantial heat via hot water extraction to ease the particular chewing gum or adhesive residue and sometimes pull much of that up into your extraction machine.
You can use heat having a vapor steam to transfer it to an absorbent towel. Then, with either method, you have a smaller amount of sticky residue to eliminate.
But with heat, you have correctly set the path to effective gum or even adhesive removals.
Heat softens the chewing gum or residue, extracting more than merely scraping can remove, so your cleaning products can function far better.


Cleaning  chemicals - Now you have to use your solvent chemicals. Generally there are many choices when it comes to solvent chemistry and gum or adhesive removal.
Another option is to use a gel solvent, usually one that contains the natural solvent d-Limonene.
Most gel solvents can be rinsed with hot drinking water and detergent.
No matter which solvent you employ, don't use significantly. The chance of carpeting backing delamination is lessened if you are using a gel solvent. A gel solvent stays where it needs to be: On the fiber, dissolving the residues.
Work the solvent in to the residue with your scraper, using plenty of force. This is where a great agitation tool with "teeth" comes in handy. The teeth permit you to get the solvent into the adhesive residue with a lot of agitation, but constantly be wary of damage to fibers. Give the section adequate dwell time, possibly up to several minutes. Don't forget that dry solvents work faster than wet solvents. Then, always rinse away the residues with hot water and detergent.

The last step - Here's where many carpet cleansers fail. They do all the above and feel they have finished the task.
But do it once more. Utilize more solvent, more agitation and flush with hot water and detergent. Although after your first attempt the job looks great, there are very likely sticky residues remaining. A second application regarding solvent and rinse means reduced possibility of a callback. A word of extreme care: Any residue left over will re-soil.
Professional carpet cleaning






No comments
 
Back to content | Back to main menu